Description
๐๐ข๐ญ ๐๐ง๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ข๐จ๐ง๐ฌ :
The 1U, 50 kg Accessory Shelf can be installed to the vertical mounting flanges in an empty space in the Easy Rack to support your equipment.
๐๐ซ๐จ๐ฉ๐๐ซ ๐ฅ๐จ๐๐๐ญ๐ข๐จ๐ง ๐ข๐ง ๐ญ๐ก๐ ๐ซ๐๐๐ค ๐๐จ๐ซ ๐ญ๐ก๐ ๐๐๐ ๐ ๐ง๐ฎ๐ญ๐ฌ :
1. Locate the top and bottom U space on the vertical mounting rails. Every third hole on the mounting rails is numbered to indicate the middle of a U space.
2. Install the cage nuts on the interior of the vertical mounting rail; then install the shelf.
๐๐ซ๐จ๐ฉ๐๐ซ ๐ข๐ง๐ฌ๐ญ๐๐ฅ๐ฅ๐๐ญ๐ข๐จ๐ง ๐ฉ๐จ๐ฌ๐ข๐ญ๐ข๐จ๐ง ๐๐จ๐ซ ๐ญ๐ก๐ ๐๐๐ ๐ ๐ง๐ฎ๐ญ๐ฌ :
โข Install cage nuts horizontally, with the tabs engaging the sides of the square hole.
โข Install the cage nuts on the interior of the vertical mounting rail.
๐๐ง๐ฌ๐ญ๐๐ฅ๐ฅ ๐ญ๐ก๐ ๐๐๐ ๐ ๐ง๐ฎ๐ญ :
1. From the inside of the rack, insert the cage nut into the square hole.
2. Hook one tab of the cage nut assembly through the far side of the hole.
3. Place the cage nut tool on the other side of the cage nut and pull to snap into position.
๐๐๐ฆ๐จ๐ฏ๐ ๐ญ๐ก๐ ๐๐๐ ๐ ๐ง๐ฎ๐ญ :
1. Remove any attached screw.
2. Grasp the cage nut, squeeze the tabs on the sides, and push to release it from the square hole.
๐๐ ๐ค๐ ๐๐๐๐๐ฌ๐ฌ๐จ๐ซ๐ฒ ๐๐ก๐๐ฅ๐ ๐๐ข๐ฆ๐๐ง๐ฌ๐ข๐จ๐ง๐ฌ :
The adjustable sliding rails on the 50 kg Accessory Shelf allow you to customize the depth from the minimum of 635mm (25.0 in) when retracted to a maximum of 1045mm (41.14 in) when fully extended.
๐๐ง๐ฌ๐ญ๐๐ฅ๐ฅ ๐ญ๐ก๐ ๐๐ ๐ค๐ ๐๐๐๐๐ฌ๐ฌ๐จ๐ซ๐ฒ ๐๐ก๐๐ฅ๐ :
Install four (4) cage nuts (provided) to the two front vertical mounting rails as described above. Install four (4) cage nuts (provided) to the inside of the two rear vertical mounting rails as described above. At the front of the rack, attach four (4) M6 x 12 pan head T30 screws (provided) to the front of the shelf and into the four (4) cage nuts you installed in the vertical mounting rails. At the rear of the rack, install four (4) M6 x 12 pan head T30 screws (provided) to the adjustable rails on the rear of the shelf and through the four (4) cage nuts installed in the vertical mounting rails. The illustration below shows this installation process.
Reviews
There are no reviews yet.