[LIMITED STOCK] UPS Network Management Card 3 with Envir (AP9641)

0 out of 5

RM2,120.00

5 in stock

SKU: AP9641 Category: APC
Compare

Description

𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧 :
The AP9640 Network Management Card:
• Provides UPS control and self-test scheduling features.
• Provides data and event logs.
• Enables you to set up notifications through event logging, e-mail, Syslog and SNMP traps.
• Provides support for PowerChute® Network Shutdown.
• Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol (BOOTP) server to provide the network (TCP/IP) values of the NMC.
• Provides the ability to export a user configuration (.ini) file from a configured card to one or more unconfigured cards without converting the file to a binary file.
• Provides a selection of security protocols for authentication and encryption.
• Communicates with StruxureWare Data Center Expert, StruxureWare Operations, or EcoStruxure™ IT.
• Supports Modbus TCP/IP.
• Supports BACnet/IP.

𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬 :
The AP9643 Network Management Card includes all AP9640 Network Management Card features and the
following:
• Provides two USB ports, which support upgrading the NMC and UPS firmware from a USB flash drive,
and the optional APC USB Wi-Fi Device (AP9834).
• Supports one universal input/output port, to which you can connect:
– Temperature (AP9335T) or temperature/humidity sensor (AP9335TH)
– Relay input/output connector that supports two input contacts and one output relay (using the AP9810 Dry Contact I/O Accessory, which is an optional add-on)
• Supports Modbus RTU via the serial RS485 port, in addition to Modbus TCP/IP. For information on how to configure Modbus RTU refer to the Modbus Documentation Addendum. UPS devices with the SRTL/SRYLF prefix with an embedded Network Management Card include all AP9640 Network Management Card features (except Modbus and BACnet support) and:
• Provide one USB port, which supports upgrading the NMC and UPS firmware from a USB flash drive,
and the optional APC USB Wi-Fi Device (AP9834).

𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐥𝐞 𝐰𝐢𝐭𝐡 :
The Network Management Card 3 is compatible with:
• Smart-UPS® devices with a SmartSlot with the SUM, SURT, SURTA, SURTD, SMT, SMX, and SRT
prefixes, and SUA devices manufactured after 2008 *.
• Single phase Symmetra® UPS devices.

𝐖𝐚𝐫𝐫𝐚𝐧𝐭𝐲 :
Two years warranty.

Reviews

There are no reviews yet.

Be the first to review “[LIMITED STOCK] UPS Network Management Card 3 with Envir (AP9641)”

X